CL or ns: how fast is memory really?
Updated 2026-10-30
Every memory kit is sold with two numbers: the speed in MT/s (for example DDR5-6000) and the CAS latency (for example CL30). Many buyers compare only one of them. That is misleading, because CAS latency is counted in clock cycles, and how long a cycle lasts depends on the speed.
The formula
True latency in ns = CL × 2000 ÷ speed in MT/s
The factor 2000 comes from DDR memory making two transfers per clock cycle: DDR5-6000 runs at 3000 MHz, so one cycle lasts about 0.33 ns.
Examples
- DDR4-3200 CL16: 16 × 2000 ÷ 3200 = 10.0 ns
- DDR5-4800 CL40: 40 × 2000 ÷ 4800 = 16.7 ns
- DDR5-5600 CL46: 46 × 2000 ÷ 5600 = 16.4 ns
- DDR5-6000 CL36: 36 × 2000 ÷ 6000 = 12.0 ns
- DDR5-6000 CL30: 30 × 2000 ÷ 6000 = 10.0 ns
- DDR5-6400 CL32: 32 × 2000 ÷ 6400 = 10.0 ns
So DDR5-6000 CL30 answers just as fast as DDR4-3200 CL16, even though its CL number is almost twice as high, and it moves almost twice as much data per second.
Speed or latency: which matters more?
Both, for different things:
- Speed (MT/s) sets the bandwidth: how much data flows per second. Video editing, compression, integrated graphics and large data sets benefit from it.
- Latency (ns) sets how quickly a single request is answered. Games benefit most, especially at high frame rates.
At the same speed a lower CL is always better. Across speeds, compare the ns values. The difference between 10 and 12 ns is usually small in games; between 10 and 16.7 ns it is clearly noticeable.
Other timings
CL is only the first of several timings (tRCD, tRP, tRAS and more), usually printed on the module as a series such as 30-36-36-76. For a quick comparison, latency in ns is the best single number; if you overclock, look at the others too.
What suits your processor
- AMD Ryzen 7000 and 9000 (AM5): AMD calls DDR5-6000 the "sweet spot". At that speed the memory controller and the memory run at a 1:1 ratio. Faster kits often add little there; low latency at 6000 MT/s matters more.
- Intel Core Ultra 200S: officially up to DDR5-6400; CUDIMM modules allow higher speeds.
- Older DDR4 platforms: DDR4-3200 CL16 and DDR4-3600 CL18 (both 10 ns) are the usual good compromises.
Whether a kit runs at its rated speed also depends on the memory profile in the BIOS: see EXPO and XMP.
Using the price list
The price list shows an ns column for every listing. Under "More filters → True latency" you can set an upper limit, for example DDR5 desktop kits of 10.7 ns or less. Sorted by price per GB, the cheapest fast kit is then at the top.