# EXPO and XMP: why new RAM often runs slower than advertised

Updated 2026-10-30

A new DDR5-6000 kit usually does not run at 6000 MT/s once installed, but at 4800 or 5600 MT/s. That is not a fault: without further settings every module starts at a safe default speed defined by JEDEC, the standards body for memory. The advertised speed only comes with a memory profile.

## What the profiles are

Every module carries a small memory chip (SPD) in which the maker stores its settings. Besides the JEDEC values, faster kits hold one or more profiles with a higher speed, tighter timings and often a slightly higher voltage:

- **XMP** (Extreme Memory Profile) comes from Intel. DDR4 modules use XMP 2.0, DDR5 modules XMP 3.0.
- **EXPO** (Extended Profiles for Overclocking) is AMD's counterpart for DDR5.

Many kits have both. Motherboards for AMD processors can usually apply XMP too, under a name of the board maker's own (DOCP at ASUS, for example). The values of an EXPO profile, though, are meant for and tested on AMD systems.

## How to turn the profile on

- Enter the BIOS/UEFI at start-up, usually with Delete or F2.
- In the memory or overclocking section, choose the profile, for example "EXPO I" or "XMP Profile 1".
- Save and restart. The first start can take longer, because the motherboard trains the memory again.
- In Windows, check with a tool such as CPU-Z that speed and timings are right.

## What the profile does not guarantee

A profile is a factory overclock. The module maker has tested the kit at these values, but whether they run stably in your system also depends on the memory controller in the processor and on the motherboard. Formally a profile runs outside the specification of the processor and the memory, and the makers point this out in their warranty terms.

- If the PC does not start or crashes: choose the next lower profile or lower the speed by one step.
- Four modules often do not reach the profile speed on DDR5. For a lot of capacity, a kit of two large modules is the better choice (see [Single or dual rank](https://ddrchecker.com/guide/en/single-dual-rank/)).
- A BIOS update often improves compatibility with fast memory.
- The motherboard maker's memory support list (QVL) shows which kits were tested on that board.

## What it means when buying

- If you do not want to turn on a profile, in an office PC for example, a fast kit is money wasted. A cheaper module at JEDEC speed is enough.
- For AMD systems a kit with EXPO is the safer choice, for Intel one with XMP; many kits have both.
- In the [price list](https://ddrchecker.com/uk/en/) you find EXPO and XMP under "More filters → Features".

## More guides

- [RAM prices now: what does memory cost per GB?](https://ddrchecker.com/guide/en/ram-prices/)
- [CL or ns: how fast is memory really?](https://ddrchecker.com/guide/en/latency-cl-ns/)
- [Single or dual rank: what 1R and 2R mean for RAM](https://ddrchecker.com/guide/en/single-dual-rank/)
- [DRAM chips: Micron, Samsung and SK hynix](https://ddrchecker.com/guide/en/dram-chips/)
- [Which RAM fits: DDR4 or DDR5, form factor and capacity](https://ddrchecker.com/guide/en/which-ram-fits/)
- [To the UK price list](https://ddrchecker.com/uk/en/)
